**************************************************
                 SURECOM EP-320X-S 100/10M Ethernet PCI Adapter
                                 NDIS 5 Driver
                       for Windows XP Installation Guide
               **************************************************

-----------------------
Installation Procedure 
-----------------------

 1. Plug the adapter into one of the Master PCI slots of your PC.

 2. Power on your PC.

 3. Open Windows XP operating system.

 4. Windows XP will prompt " Ethernet Controller " in " Welcome to the Found New Hardware
    Wizard " dialog box.

 5. Select " Install from a list or specific location (Advanced) " from " Found New Hardware 
    Wizard " dialog box, then click <NEXT> button.

 6. Select " include this location in the search " from " Search for the best driver in these
    locations " of " Found New Hardware Wizard " dialog box.

 7. Insert driver disk bundled with " SURECOM EP-320X-S 100/10M Ethernet PCI Adapter ".

 8. Enter the driver pathname, then click the <NEXT> button from " Found New 
    Hardware Wizard " dialog box.

      Example :

             A:\WINXP
      
 9. Select your installed adapter - " SURECOM EP-320X-S 100/10M Ethernet PCI Adapter ",
    then click the <NEXT> button from the dialog box.

 10. To complete the process, please follow the instructions on the screen.

 11. If the message " The software you are installing for this hardware :
 
            " SURECOM EP-320X-S 100/10M Ethernet PCI Adapter "
     
     has not passed Windows Logo testing to verify its compatibility with Windows XP.

     Please click < Continue Anyway > button.